Results 1 to 1 of 1
  1. #1
    srv
    srv is offline
    Junior Member
    Join Date
    Oct 2019
    Posts
    1

    Help Please: Gaggia syncony compact digital problem

    My machine had a blocked brew group message and slow motor. It finally turned the brew group enough to remove it. I then replaced the power transistor and a burnt up MOV and the motor turns normally however the brew group gear doesnt return to the home position. I replaced one of the two gear box microswitches and the gears are not broken. Replacing the microswitch didn't change anything. When turned on the brew gear turns till it hits the microswitch reverses direction but goes too far by a mm or 2 and the brew group cant be installed. Any suggestions on what this could be would be helpful. I was thinking the motor is running too fast or the main board is bad. I am not sure if the second microswitch would cause this issue.

    thanks

 

 

Remove Ads

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Gaggia Syncony makes coffee but not steam
    By augeydoggy in forum Coffee and Espresso Machines
    Replies: 1
    Last Post: 09-14-2014, 09:14 PM
  2. gaggia syncrony compact over fill problem
    By patrick78uk in forum Coffee and Espresso Machines
    Replies: 3
    Last Post: 01-05-2014, 08:07 AM
  3. Replies: 0
    Last Post: 10-06-2013, 01:54 AM
  4. Gaggia Compact Digital
    By packman9111 in forum Coffee and Espresso Machines
    Replies: 1
    Last Post: 08-14-2011, 08:40 AM
  5. gaggia synchrony vs. gaggia compact digital
    By seattlecook in forum Coffee and Espresso Machines
    Replies: 6
    Last Post: 07-26-2009, 12:57 PM