Challenge for you experts - identify what machine these portafilters are for...

roddyjb

New member
Aug 14, 2013
5
0
Visit site
These two were purchased by a friend off Craigslist for a commercial Gaggia but did not fit.
Can anyone tell me what machine they are for? Maybe he can recoup some of his losses.
Ears are at 2 & 7
measurements =
outer rim of filter is about 70.4mm
top edge of filter rim to top of ear is about 8.4mm
ear is about 5.5mm thick
DSC08255.JPGDSC08254.JPGDSC08253.JPG
 
Last edited:

JumpinJakJava

New member
Dec 12, 2011
389
0
Thomaston, CT
Visit site
Not too sure about Nuova Simonnelli PFs. But they look like the portafilters that fit the C.M.A. machines(Rio espresso, Astoria, etc.)
Ears not quite 2(about 1:30 No joking!) and 7. I have both a Rio 2 grp. and an Astoria 2grp., and boy your pics look like they will fit
these machines.
 

roddyjb

New member
Aug 14, 2013
5
0
Visit site
Yes, they are solid heavy good quality.
Any chance anyone can check the measurements I posted with one of their PFs
 

namballe

New member
Aug 24, 2012
335
0
Lima, Peru
Visit site
These two were purchased by a friend off Craigslist for a commercial Gaggia but did not fit.
Can anyone tell me what machine they are for? Maybe he can recoup some of his losses.
Ears are at 2 & 7
measurements =
outer rim of filter is about 70.4mm
top edge of filter rim to top of ear is about 8.4mm
ear is about 5.5mm thick
here are the specs from my NS pfs.
ears at 2&7 o'clock
length of ear approx. 26 mm.
o.d from ear to ear approx. 80.5 mm
o.d. of rim only 70 mm.
overall length 225 mm.
by the specs. seems yours will fit a
Nuova Simonelli machine.
look on the bottom of the pf for any logo.028.JPG026.JPG
 
Last edited:

roddyjb

New member
Aug 14, 2013
5
0
Visit site
Thanks, I'll put it in the car and next time I am somewhere using a Nouva Simonelli I'll see if I can try it. There are no logos or marks anywhere on either.
 
Top