WMF Software... please help!

[yyyog]

just needed it!

[Affogato]

just needed it!

Did you get it?
here is a link, you have to share when someone else is in trouble.
https://filebin.net/k0nxuqqp7pnl1xkm

[topcoffee]

hi.
this link is already expired.
can You upload again please?
tnx

and any Konfig file for Schaerer Vito?
best regards

[Koonus]

I have a similar situation when a hard drive burned out on my laptop, I lost all data about the previous software. Unfortunately, data recovery is no longer possible. Then I turned to the laptop repair service, in which they made my repairs, they also suggested that I forget about using HDD and try SSD, which is considered a faster analog. At the moment, I needed to install new software, but I managed to recover some data in the service, it's better than losing everything. Try to also find out about this in Service, suddenly it turns out to change something.

[Sunsys]

Does somebody got the Konfig Tool for the Bistro! 8400? It's really urgent. Thanks.

[sparrrowhawk]

konfigtool WMF 800-900-1000

https://mega.nz/file/S3w3wCDY#JTRlFw...LL2zP93OgVAlzM

Service-Manual WMF 800-900-1000:

https://mega.nz/file/Pi5ljaKb#VthZVv...iTLh6ycVDMKVr0

[Affogato]

konfigtool WMF 800-900-1000

https://mega.nz/file/S3w3wCDY#JTRlFw...LL2zP93OgVAlzM

Service-Manual WMF 800-900-1000:

https://mega.nz/file/Pi5ljaKb#VthZVv...iTLh6ycVDMKVr0

YES! sparrrowhawk 10/10.. this is what we need to see more of

[sparrrowhawk]

I search Firmware-Files f0r WMF 800....

[Maryk]

Hi
Can anyone have a processor firmware for the WMF 1000 Pro?
My processor burned out and I ordered a new one from China, not flashed.
Unfortunately, the firmware I have is only suitable for WMF ECCO II and WMF 1000 Standart.
I have the ability to connect to the board and flash it.

[sparrrowhawk]

Hi
.... the firmware I have is only suitable for WMF ECCO II and WMF 1000 Standart.
I have the ability to connect to the board and flash it.

Can you share FW for WMF 1000 Standart?
I search FW for WMF 800 also...