Results 1 to 6 of 6
  1. #1
    Junior Member
    Join Date
    Jun 2009
    Location
    Florida
    Posts
    6

    Watlow Controllers (on the abex YM-2 or Aftermarket install)

    Hey everyone!

    I just got my Ym-2 roaster yesterday ( a used 2007 with the digital gas controls) and am more than a little excited to say the least. I've got to run out and get a propane adapter for my tank and I'll be up and running (at least to test it). I also hadn't realised how many different functions the standard Watlow digital controller could perform on its own.

    I've gone to the watlow website and downloaded the manual but it's all a bit technical for just starting out on the machine. Does anyone else have the Watlow SD series (PID, not limit) controller? I'd love some tips or instructions on how to use it for more advanced things than just turning the gas on and off, or reading the bean temp.

    I'm extremely anxious to get started.

    Thanks,

    Andrew

  2. #2
    Junior Member
    Join Date
    Jul 2009
    Location
    Kennett Square, PA
    Posts
    18

    Re: Watlow Controllers (on the abex YM-2 or Aftermarket install)

    Andrew,
    I just started up our Ambex YM10 roaster that I bought second hand. Like you I got the manual and was a little confused by all the techie stuff, but plowed through it and think I have an OK handle on it. It was not setup for thermocouple control when I got it, so I changed to that first thing (SeN = TC). Then I set the Control 1 (Ot 1 = PrAL), then you can set the alarms for the high and low side (in my case I set the High Alarm at 370 so I know to get ready for the fun). I set Control 2 to handle the Heat (Ot 2 = Heat), this will control the burner. Make sure you set Alarm Silencing for Ot1 to On, or the alarm will go off at 370 and you will not be able to turn it off, annoying to say the least (S.L1 = On). Most of the other functions I set to default. I am still confused about some of the settings, so don't take this as gospel. Disclaimer, I am in NO way an authority on the Watlow, so take this for what it is worth. Feel free to PM me next week and I will send you my phone number, I will be glad to scroll through the settings with you and see if we can get this thing going. My Watlow is the 1/32 SD model. BTW, it took me 5 hours of hunting and pecking to get this thing set. If you run across the default settings for Ambex machines I would sure love to see them.

    Happy Roasting, Eric
    "Savor your Independence!"

  3. #3
    Junior Member
    Join Date
    Oct 2007
    Location
    Clearwater, Fl
    Posts
    27

    Re: Watlow Controllers (on the abex YM-2 or Aftermarket install)

    i wouldn't recommend changing the program in the watlow controller or try and get anymore performance out of it. the controller was programmed to be a simple on/off set point controller. the dial for the maxitrol digital proportioning valve is all the extra manual control you would need as far as controlling the flame. If you changed your settings you can call me and i can walk you through putting them back to factory.

    727 804 8967
    -Don

  4. #4
    Junior Member
    Join Date
    Jun 2009
    Location
    Florida
    Posts
    6

    Re: Watlow Controllers (on the abex YM-2 or Aftermarket install)

    Apparently I'm not getting my automatic notifications in my email anymore. I thought I had set something to tell me when someone had responded. I lost hope in this thread a few months ago and hadn't been back online here in a while to check. I've got a shop that I'm opening up very shortly (as in about a week) in Sarasota, FL and have gotten into the specifics of the machine a lot more again. I'll be calling Ambex shortly to inquire about some roast profiling software (I think I just sent an information request last night via their website). I had been doing pretty well on my roasts, but I suppose I slacked a little lately and have been getting some mixed batches. It's time to get back to the basics of why I'm opening this store up in the first place.

    Don, I guess I had thought the Watlow would have been a little more complex than just a on/off set point with all the options it seems to have but then again, after I had read the manual about a thousand times and after playing around with it I sort of just resigned to that fact. Is there a ramp/soak controller I could get as a direct replacement without major modifications? Would the maxitrol valve support scaling back the propane/gas by percentages? Are there any digital meters/inputs into the PID that would give a pressure reading of how much gas is flowing via the maxitrol? I have tons of questions and hoping to answer some tomorrow or Monday depending on if I can get some answers from a few companies I need to speak with about real time data logging (not specifically meant for the roasting industry, but good companies none the less.

  5. #5
    Member
    Join Date
    Apr 2010
    Posts
    31

    Re: Watlow Controllers (on the abex YM-2 or Aftermarket install)

    So did you ever find out anything about the ramping version of the SD Watlow. I know there is one but I have not investigated if it will work for the YM-2. I just bought a 2009 YM-2 on ebay that was never hooked up. It's on it way and I should have it next week so it looks like my BBQ roasting days are limited.

  6. #6
    Junior Member
    Join Date
    Jul 2011
    Location
    Palm Harbor, FL
    Posts
    6
    I should be able to answer your questions if they have not been answered yet. Just let me know what questions you still have.

    Paul Ribich
    Roaster Dynamics LLC

 

 

Remove Ads

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

abex 2k coffee roaster
,
ambex ym-2 watlow
,
how to program a watlow f4
,
programming watlow ez-zone pm ambex ym-2
,
ultrabook abex
,
watlow ambex
,
watlow coffee roaster
,
watlow default password
,
watlow f4 controller default password
,

watlow f4 default password

,
watlow f4 password
,
watlow pid ambex coffee roaster
Click on a term to search for related topics.