Cleaning and removing Burrs on Pavoni PGC

DavidRossi

New member
Feb 17, 2005
5
0
Providence RI
Visit site
Hi , New to the forum but not to coffee
Here is my problem. I have a Pavoni PGC since 2002. It must have picked up a stone, or some such thing. It growled and shut down.

I would like to get in there and clean the burrs and find a reset, but have lost the manual and the vendor has been no help.

Can anybody help or point me in the right direction

Thanks
Davind
 

rcs1

New member
Feb 10, 2005
21
0
Visit site
Start by unscrewing the 3 screws in the hopper. Take the hopper off. Then unscrew the screws holding in the adjustment worm gear. Then you can unscrew the burrs.

The PGC has a poor reputation for breaking down, unfortunately.
 

DavidRossi

New member
Feb 17, 2005
5
0
Providence RI
Visit site
Thanks for the reply
I managed to to that and I still get no power, so I am figuring on just tossing it, since it looks to be a project to change the motor, and it is not cost effective
It is to bad a 189.00 grinder broken at a year and half.

Thanks Again
David
 

rcs1

New member
Feb 10, 2005
21
0
Visit site
Well, you would likely be better off putting it on ebay. Likely you can get $20 or $30 for it. Just state that it is broken, and put a "buy it now" price on it. Someone will likely buy it.

Or if you want, you can ship it to me :-D I could use the burrs.

Chris
 
Top