CoffeeTec.Com

NEW RELEASE: COFFEE ROASTER DRUM [GEN2 Model]

coffeeroastersclub6

New member
Nov 30, 2006
27
0
Connecticut
Be the first to get our NEW GEN2 Model of our popular Coffee Roaster Kit for George Foreman & Ronco Rotisseries. This new model has been specifically designed for complete ease of use and durability. Why purchase an expensive Coffee Roaster when you can buy this extremely easy to use and very inexpensive Coffee Roaster Kit to roast coffee beans with your George Foreman or Ron Popeil rotisserie appliance!!

Available here: http://www.coffeeroastersclub.com/produ ... tem_id=137

The GEN2 Coffee Roaster Kit comes fully assembled and ready to go! Fits inside of your George Foreman or Ron Popeil (also known as "RONCO") rotisserie. No alterations to your Foreman or Popeil rotisserie are needed for this roaster to work! Complete operating and roasting instructions included, along with 1/2 cup unroasted green coffee beans to start you off! Can easily roast a pound or more of coffee at a time, much more than other more expensive units. Nothing else needed to buy.

http://www.coffeeroastersclub.com/produ ... tem_id=137

Drum is rivet constructed for high strength, with a 20 Gauge Perforated Stainless Steel cage, 14 Gauge 100% Aluminum End plates, and interior Finwork that is 100% aluminum which runs the entire length of drum.

Complete pictures of the GEN2 Coffee Roaster Kit are shown below. Pictures show drum with Ronco gear assembly, shown as an example only. Drums are also designed for use with the George Foreman rotisseries, some of which have a different gear assembly configuration. (Please note that any rotisserie rods and gear assembly shown in below pictures are not included due to the fact that they are actually included in either your George Foreman or Ron Popeil Rotisserie appliance).

68.jpg
69.jpg
70.jpg
71.jpg


(AGAIN, Gear Assembly shown in these pictures is NOT included with this purchase. The gear assembly shown is part of the Ronco Rotisserie itself. This drum can also fit the George Foreman rotisseries; the Ronco setup shown is for illustration purposes only.)

72.jpg
73.jpg
74.jpg
75.jpg

76.jpg
77.jpg
78.jpg



(AGAIN, Gear Assembly shown in these pictures is NOT included with this purchase. The gear assembly shown is part of the Ronco Rotisserie itself. This drum can also fit the George Foreman rotisseries; the Ronco setup shown is for illustration purposes only.)

http://www.coffeeroastersclub.com/produ ... tem_id=137

The GEN2 Coffee Roaster Kit will fit the following models of George Foreman and Ron Popeil rotisserie's:

Foreman Baby George - Foreman George Jr. - Foreman Big George

Popeil Showtime 2500, Compact (ST3000), Standard (ST4000), and Platinum (ST5000) Models

--------------------------------------------------------------------------------

Answers to Frequently Asked Questions:

Q: Are there any non-metal parts that are part of this unit?
A: Absolutely not. The GEN2 Coffee Roaster Kit is stainless steel and aluminum construction. No part of the unit is made from plastic or other non-metal part.

Q: Does this roaster have vertical fins inside of the roasting drum to help evenly distribute the beans during the roasting process?
A: Yes in fact it does. The fins are attached inside of the drum, and significantly help in the roasting process.

Q: I looked at ronco's website and did not see one called "platinum". But there was one called "standard". Will this drum fit the standard model?
A: Yes it will fit the standard Ron Popeil "Ronco" Rotisserie model. The platinum model is the same size as the Standard model. The other model he has is called the Compact model.

http://www.coffeeroastersclub.com/produ ... tem_id=137
 
CoffeeTec.Com
Top