Artisan 2.4 temp readings


New member
Jan 28, 2018
Chino ca
I downloaded the latest 2.4 version of Artsian and my BT readings are now 100 degrees higher than my PID. The instructions in Artisan setup make no sense to me. When I was running Artisan 2.0 my readings were within a degree or 2 of each other. Any help would be greatly appreciated!

Since the date of this post I have been researching this issue on my own and when I went into “Devices” I discovered that the thermocouple type was set to “K” and mine is a “J” so I adjusted that and now my temps are reading within a degree or two of the machine PID once again. An easy fix for anyone experiencing a similiar issue.
Last edited: