New to the forum and in search of a User Manual and a Service Manual for my Nuovo Simonelli MAC 2000v.
if anyone could attach one or direct me to a downloadable copy, I would be very grateful.
I'd like to coordinate with you as you progress if possible. would like to piggyback on your part (order) numbers if you are ordering all the orings, etc.I just started a MAC 2000V rebuild also. Just tested the as-found unit yesterday. Boiler filled and got hot! Still much to do.
Two basic options for plumbing water to your machine:On the MAC 2000V- i was finally able to get 220 installed in my garage and plugged it up for the first time. It lit and it seems like the pump started which is a good sign. However, I quickly turned it off because i have no water line connected.
The question i have is what is the water pressure i need for the input? For troubleshooting, I would like to get a 5 gallon water bottle and use a water pump to pump water as the source. However, the only thing i can find for the source pressure is 4 bars which to foreign to me. I will be looking for a water pump with a variable pressure but again, what PSI is needed for the source water pressure?
Also, i'm seeking a black "safety tray" which sits in the bottom front and has 2 screws on each side. My left side of the tray is literately gone from rust so I need to replace it.
How did you make your citric acid bath? If you have a MAC 2000V 2 Group, would you share a parts list with all the orings and any MODs you plan to do?I've got my unit's plumbing disassembled and in a citric acid bath. Although it was dirty as sin, I only found one line completely plugged.
The boiler and element had a smaller amount of scale, not too bad. Into the bath also.